Powder Coating Plants

Home / Powder Coating Plants

High-efficiency Powder Coating plant manufacturer

Intech provides end-to-end powder coating plants that are modular in design and custom-made to suit the unique requirements of OEMs or end large-scale job coaters.
Our powder coating plants are built according to space availability, component substrates, required finishing levels and other intricate requirements.

Powder coating booths are offered in Stainless steel, Carbon steel or Composite materials.
At Intech, we not only provide Powder coating applicators and guns but also provide booth chambers, multi-cyclone for effective powder recovery, and post-filters to stop the powder from entering into breathing air.

Depending upon the size of the article, coating requirements, and material handling requirements Intech has designed some standard models. Customized booth design is also done for any non-standard or specific focus requirements.

Benefits

Automatic mixing of fresh & recovered powder.

Automatic feeding of powder to spray gun.

Automatic on-line sieving.

Prevention of entry of fines in atmosphere.

Modular Multicyclone
Powder Coating Booth
Post Filter

Modular Multicyclone

A guaranteed efficiency of 98.5 % with a very long life gives the Multicyclone an edge over other powder recovery systems. The high velocity of powder in the multicyclone reduces powder sticking, so cleaning time is negligible.

Powder Coating Booth

These types of booths consist of square chamber, multicyclone with blower, motor & bin. Each component of the booth contributes to ensuring an efficient and optimized powder coating process.

The carbon steel powder coated spray chamber with the multi-cyclone recovery gives almost 100 % powder utilization. It is maintenance-free and has a very long life. The powder booth is easy to clean, resulting in a quick colour change and is safe to operate. No powder spillage out of the booth and maximum recovery through the multi-cyclone results in the desired pollution control.

Post Filter

98.5% efficiency of the Multicyclone helps in maximum utilization of chargeable powder. But to comply with Pollution Control Laws, the 1.5% powder fines are required to be arrested. The post filter arrests this powder and gives out breathable air.

A number of filter cartridges are mounted inside the sealed metallic chamber. The air enters the chamber and the filteration occurs ‘outside in’. Periodic purge removes the powder and clean the cartridge. Clean air is given out through the blower outlet.