Powder Coating Booth

These types of booths consist of square chamber, multicyclone with blower, motor & bin. Each component of the booth contributes to ensure efficient and optimized powder coating process.

The carbon steel powder coated spray chamber with the multi-cyclone recovery gives almost 100 % powder utilization. It is maintenance free and has a very long life. The powder booth is easy to clean, resulting in a quick colour change and is safe to operate. No powder spillage out of the booth and maximum recovery through the multi-cyclone results in desired pollution control.

Different Models:

Depending upon size of the article, coating requirements, material handling requirements statfield has designed some standard models. Customized booth design is also done for any non standard or specific focus requirements.

Powder Recovery System -

Modular Multicyclone

Guaranteed efficiency of 98.5 % gives the Multicyclone an edge over other powder recovery systems. The high velocity of powder in the multicyclone reduces powder sticking, so cleaning time is negligible. The recovery chambers come in different models to suit the articles to be coated.

Post Filter

98.5% efficiency of the Multicyclone helps in maximum utilization of chargeable powder. But to comply with Pollution Control Laws, the 1.5% powder fines are required to be arrested. Statfield post filter arrests these powder fines and gives out breathable air. A number of filter cartridges are mounted inside the sealed metallic chamber. The air enters the chamber and the filtration occurs 'outside in'. Periodic purge removes the powder, cleans the cartridge and clean air is given out through the blower outlet.

Integration Concept 

Booth - when integrated with Equipment and post filter gives:

• Automatic mixing of fresh & recovered powder.
• Automatic feeding of powder to spray gun.
• Automatic on-line sieving.
• Prevention of entry of fines in atmosphere.